Air will pair with most Bluetooth devices that use Bluetooth^Ⓡ 3.1 or higher, including phones, tablets, computers and watches. Air may not pair with gaming consoles and some transmitters.

Air can be paired with some Bluetooth Smart TV that has Bluetooth^Ⓡ 3.1 or higher. Without Bluetooth, you will need a Bluetooth transmitter.

1.Start with your Air powered off

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Your Air will turn on (continue holding the button) and then the LED light will flash red and blue. Audrey will say "pairing" indicating pairing mode.

3. Open your device's Bluetooth settings and select "Air by Shokz". Audrey will say "connected."

Air offers multipoint pairing, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.To pair multiple devices through multipoint pairing:

1.Start with your Air turned off.

2.Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue.

3.Press and hold the multifunction button and volume+ button for 2-3 seconds. Audrey says "Multipoint Enabled."

4.Open your first device's Bluetooth^® menu and select "Air by Shokz."Audrey says "connected"

5.Turn your Air off.

6.Re-enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue.

7.Pair the second device. Audrey says "Device Two Connected."

8.Turn your Air off.

9.Your Air should now be connected to both devices.

You can disable multiple pairing by pressing and holding the volume- button, and multifunction button under pairing mode. Audrey says"Multiple disabled"

When paired through the multipoint pairing process, Air will connect to whichever device is in range. If both devices are in range, it will connect to whichever device you were more recently using. You can switch devices through some notifications such as a phone call, or simply by using the opposite device. Multipoint pairing may not work with all devices or transmitters.

You can change the devices to which your Air is paired by resetting the headphones, and then pairing the new devices. To reset Air:

1. Start with your Air off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.

4. Turn your Air off. Air is now reset and can be re-paired with new devices.

After resetting, the headphones will clear all connected devices before. The headphones needs pair with new devices under pairing mode.

1.Start with your Air powered off

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Your Air will turn on (continue holding the button) and then the LED light will flash red and blue. Audrey will say "pairing" indicating pairing mode.

3. Open your device's Bluetooth settings and select "Air by Shokz". Audrey will say "connected."

Click the volume+ or volume- button while Air is idle. Audrey says “Battery High,” “Battery Medium,” “Battery Low,” or “Charge Me.”

To pause a song, click the multifunction button once while music is playing. You’ll hear one beep.

To play a song, click the multifunction button once while music is paused. You’ll hear one beep.

For the playing volume, click the volume+ or volume- buttons to turn up or turn down volume levels while music is playing.

For the beep volume, it is the default volume set in the factory and can't be adjusted.

Double-click the multifunction button while music is playing. You’ll hear one beep. The next track will play.

Three-click the multifunction button while music is playing. You’ll hear one beep. The previous track will play.

Double-click the multifunction button while Air is idle. Audrey says “Last Number Redial.”

Press and hold the multifunction button for two seconds, prompting your phone’s intelligent personal assistant. You’ll hear one beep. The function depends on the connected device and application.

There are 2 EQ settings for Air. One is the Standard mode for daily listening to music. The other one is Earplug mode, which offer more bass in specific audio. You can press and hold the volume+ and volume- buttons simultaneously for two seconds while music is playing. Audrey says “EQ changed.”

Air can support 4 languages, including Chinese, Japanese, English and Korean. You can follow the steps to change language.

1. Turn off your headphone first;

2.Press the volume + button for 5-7 seconds until the headphone enter the pairing model ( LED light will flash red & blue);

3.Double click the multifunction button and you hear a beep;

4. Volume + or Volume - button to check the language.

1.Start with your Air powered off and cleared from your device's Bluetooth settings

2. Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your Air will turn on (continue holding the button) and then the LED light will flash red and blue. Audrey will say "pairing" indicating pairing mode.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your Air off.

Your Air are now reset and can be connected to new devices.

After resetting, the headphones will clear all previous connected devices. The headphones needs pair with new devices under pairing mode.

Yes! Air has a dual noise canceling microphone so that you can answer and make a call with it.

(For Windows system)

After the successful connection to a laptop. There are 2 channels for you to choose from.

Channel 1: Headphones (Air by Shokz Hands-Free AG Audio)

This channel is used to manage voice calls, etc.

Channel 2: Headphones (2-Air by Shokz Stereo)

This channel is used to manage the music channel, for listening to music, watching video and other audio output

You can change the Channel via the bottom volume icon.



(For OS system)

After the successful connection to an OS laptop, it will automatically change Channel for you under actual situation.

To mute the microphone, press and hold the volume+ and volume- buttons simultaneously for two seconds while on a call. Audrey will say “Mute on.”

To unmute the microphone, press and hold the volume+ and volume- buttons simultaneously for two seconds while on a call with the mic muted. Audrey will say “Mute off.”

Click the multifunction button once while a call is coming in. You’ll hear one beep and the call will be answered. If you want to end a call, click the multifunction button once while on a call. You’ll hear one beep and the call will end.

Press and hold the multifunction button for two seconds as a call is coming in. You’ll hear two beeps and the call will be rejected.

Press and hold the multifunction button for two seconds as a call is coming in. You’ll hear one beep and the current call will be ended.

We suggest that you test Air with an alternate micro USB charging cable. If Air continues to not charge, you can file a warranty claim here within 2-year warranty period.

We suggest that you can charge Air and put them on a dry place for a few days. If the LED light is still on, you can file a warranty claim here within 2-year warranty period.

We suggest that you charge the Air to check if the Air is out of the battery first, and confirm that you are pressing and holding the volume+ button, which acts as the power button on Air, for 3-5 seconds. Audrey will say “Welcome to Shokz.”

If you continue to be unable to power on your Air, you can file a warranty claim here within 2-year warranty period.

Most connectivity problems may resolve with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset Air

4. Charge Air for a few minutes.

5. Pair your Air again

If it is the first time to happen the issue, we would like to recommend you to keep it for a while to check whether the issue happens in the future.

If the issue happens frequently on your Air, you can file a warranty claim here within 2-year warranty period.

Most connectivity problems may resolve with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset Air

4. Charge Air for a few minutes.

5. Pair your Air again

Most connectivity problems may resolve with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset Air

4. Charge Air for a few minutes.

5. Pair your Air again

If using a phone, please check your accessibility settings to ensure the volume is equally balanced between both left and right sides.

After checking the phone’s accessibility settings, we suggest that you try to reset your Air.

1. Start with your Air off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.

4. Turn your Air off. Air is now reset and can be re-paired with your device

If the above step can't be helpful to you, you can file a warranty claim here within 2-year warranty period.

Please confirm that the volume is turned up on both your device and on Air. If both are turned up, please reset Air by following instructions:

1. Start with your Air off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your Air will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your Air off.

Your Air is now reset and can be re-paired with your device.

If the reset does not resolve the issue, you can file a warranty claim here within 2-year warranty period.

First of all, you are able to adjust the volume while the headphone is playing music.

(For Windows system)

After the successful connection to a laptop. There are 2 channels for you to choose from.

Channel 1: Headphones (Air by Shokz Hands-Free AG Audio)

This channel is used to manage voice calls, etc.

Channel 2: Headphones (2-Air by Shokz Stereo)

This channel is used to manage the music channel, for listening to music, watching video and other audio output

The volume only can be changed under Channel 2, kindly change the Channel via the bottom volume icon.



(For IOS system)

After the successful connection to an OS laptop, it will automatically change Channel for you under actual situation.

A manual reset may help resolve some sound quality issues. To reset your Air:

1. Start with your Air off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your Air will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your Air off.

Your Air are now reset and can be re-paired with your device.

If the issues of the microphone continue, kindly contact us or email at shokz@denaster.com.

A manual reset may help resolve some microphone issues. To reset your Air:

1. Start with your Air off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your Air will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your Air off.

Your Air are now reset and can be re-paired with your device.

If the issues of the microphone continue, kindly contact us or email at shokz@denaster.com.

If your Air is snapped on the headband, you can file a warranty claim here within 2-year warranty period.

If your Air is peeled from speaker, you can file a warranty claim here within 2-year warranty period.

If your Air falls off a button, you can file a warranty claim here within 2-year warranty period.

The battery will be affected by the usage time. The last time is based on many factors, including battery, volume, environment and so on. More details kindly contact us or email at shokz@denaster.com.

We recommend that you clean your Air on a regular basis by rubbing it down with a clean, dry cloth.

When not in use, we suggest you store your Air in a safe, dry place within a portable pouch, semi-hard zipper case, or hard case. In addition, to make sure it can work fine after long time storage, we advise you to use it occasionally.

IP55 water-resistant means the products are anti-spray（3.63mm） from water for 1~3 minutes. When you wear the headphones in the continually rain the water might enter it through actual hole. Therefore, kindly use the headphone in a dry, clean place.

The main differences are the function. The hearing aids work by amplifying sound to make the users get the amplified sound while our headphones are featured with the bone conduction technology which the sound is transmitted by the bone instead of amplifying the sound. Moreover, our headphones need to connect a playing device but hearing aid can work alone.

As the situation varies person from person, we are unable to confirm that whether our headphones will work for any particular individual. We suggest you can ask the doctor first, or there are plenty of retailers with in-store demos, we encourage you to give them a try.

It depends on the type of hearing aids, the headphones are ear-hook style and suitable to wear at the same time with hearing aids if there is space at ear. With Bluetooth, the headphones need to be paired to a device to play the music via Bluetooth. We would suggest you can contact the support team of the hearing aids to confirm the function. Moreover, there are plenty of retailers with in-store demos, we encourage you to give them a try.

We do offer a 2-year warranty for all our customers that bought headphones from the authorized agents, against manufacturing defects for all of its authentic products from the date of purchase. If you experience a manufacturer defect at any point in the first two years, kindly apply for a warranty claim. More detail about warranty claim reference here

The orders placed on shokz.ae enjoy a 30-day return window. If you're not satisfied with your purchase for any reason, simply return it within the 30-day trial period from the purchase date for a refund. More detail about order reference here